首页 > 新闻动态 > 新闻详细
中联铣刨机联接盘#2137131
新闻类型:机械相关  阅读次数:39   发布时间:2024-07-29

   联接盘就是把两个物体连接在一起,能够使机械正常工作的一个连接体。

连接体是可摘局部义齿的主要组成部分之一,它将义齿的各部分连接在一起,同时还有传递和分散牙合力的作用,有大连接体和小连接体之分。 大连接体亦称连接杆,主要有腭杆、舌杆、腭板、舌板、唇杆等,其作用为: (1)连接义齿各部成为一个整体,传递和分散牙合力至基牙和邻近的支持组织,以减少基牙在功能状态时所承受的扭力和负荷。 (2)大连接体的使用可减少基托面积,并可增加义齿的强度。 小连接体的作用是把金属支架上的各部件,如卡环、支托等与大连接体相连接。它与大连接体应呈垂直相连,需离开牙龈少许。经过牙齿表面时,应较细,以免影响舌的运动。应放在非倒凹区,否则影响义齿就位。需放在牙齿的邻间隙内并呈光滑表面,无锐角,无间隙,要有足够的强度和硬度,以便分散牙合力。

 

免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除.

企业介绍

公司供应摊铺机配件,压路机配件,铣刨机配件,摊铺机刮板驱动轴,刮板驱动轴总成,找平仪,找平仪支架以及液压泵和配件。还供应摊铺机易损件,摊铺机平衡梁,搅龙轴,踏板,输料底板,叶片,熨平板,减速机,链轨,履带板,支重轮,刮板大链条,输料链条等。

 

联系人:梁经理

联系方式:13645201509

(微信同号)

QQ:2870202745

QQ邮箱:2870202745@qq.com

网易邮箱:LS13645201509@163.com

A connecting disk is a connector that connects two objects together and enables the machine to function properly.
The connector is one of the main components of removable partial dentures, which connects the various parts of the denture together and also has the function of transmitting and dispersing occlusal forces. There are two types of connectors: large connectors and small connectors. Dalian joint, also known as connecting rod, mainly includes palatal rod, lingual rod, palatal plate, lingual plate, labial rod, etc. Its function is to: (1) connect the various parts of the denture into a whole, transmit and disperse the occlusal force to the abutment teeth and adjacent supporting tissues, in order to reduce the torque and load borne by the abutment teeth in functional state. (2) The use of Dalian braces can reduce the base area and increase the strength of dentures. The function of the small connector is to connect various components on the metal bracket, such as snap rings, supports, etc., with the large connector. It should be vertically connected to the Dalian junction and slightly away from the gums. When passing over the surface of teeth, it should be thin to avoid affecting the movement of the tongue. It should be placed in a non inverted area, otherwise it will affect the placement of the denture. It should be placed in the adjacent gaps between teeth and have a smooth surface, without sharp angles or gaps. It should have sufficient strength and hardness to disperse the occlusal force.
Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it
Company Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.
Contact: Manager Liang
Contact information: 13645201509
(Same WeChat account)
QQ:2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
联系地址:徐州市矿山路枫林绿洲南门 邮编:221000
 联系电话:13645201509 QQ:2870202745  企业邮箱:audelo@163.com
版权所有 技术支持:徐州奥德隆工程机械有限公司 徐州德道网络科技有限公司
苏ICP备08022494号